No Sew Burlap Ruffled Runner Tutorial. Easy directions to make a custom burlap table runner that requires no sewing. Uses ready-made ruffled trim.
As one who loves to sew, I have found that sometimes adapting a project to make it “no-sew” is tricky. That’s not the case with this no sew burlap ruffled runner. Using a hot glue gun made putting this runner together quick and easy.
*Affiliate links included. Click HERE for my disclosure statement.
This post may contain affiliate links. See my disclosure statement.
Burlap Runner Supplies Needed:
- burlap
- ready-made ruffled trim
- scissors
- glue gun with glue sticks.
- I got the printed burlap at JoAnn, but it is no longer available.
The measurements of my runner are 20 inches x 50 inches. You can, of course, make your runner any size you want. For this size, I would recommend getting 1 3/4 yards of burlap. Most likely you could get away with 1 1/2 yards but that would be cutting it close at 54 inches. When you prepare the burlap, you will lose a few inches on the ends because it gets shaggy.
How to Wash, Dry, & Cut Burlap
No Sew Burlap Ruffled Runner Tutorial
1. Prepare your burlap. Here is my tutorial on How to Wash, Dry and Cut Burlap. After you have prepared your burlap, cut a piece that measures 20 in. wide by 50 in. long. These are basic start measurements. You can make your runner any size you want. On the long sides, pull out 6 strands to create a fringed edge.
2. Cut 6 pieces of ruffled trim in 24 in. lengths. Begin attaching the first length of ruffle with a hot glue gun.
3. Let the ruffled edge hang off the end of the runner to cover the raw edge.
4. Make sure to leave a 2-inch overhang on each side of the runner. Run a bead of hot glue along the runner and completely attach the first ruffle. Work in about 5-inch sections.
5. Using the same method, glue the second row of ruffles above the first row.
6. Repeat again for the third row. Now rotate your runner and glue 3 rows of ruffles to the other end.
7. Turn the runner over so the back side is facing up. Trim the ends of the 3 rows of ruffles so they are even, 1 inch from the edge of the runner.
8. Glue the ends down so they are neatly attached to the back side of the runner.
9. Repeat steps 7 and 8 for the other end of the runner. Press well.
Handy Quick Links:
- how to make a burlap table runner with tassels
- easy, no sew burlap table runner
- how to cut burlap (includes how to wash burlap & drying tips)
This does not have to be exact or perfect. The ruffles are very forgiving, so if they are a bit wavy, don’t worry about it. You can make this design your own by adding more rows of ruffles, or using a wider ruffled trim. Use this no sew burlap ruffled runner tutorial to make a custom runner that reflects your own personal style!
Ann, I love the runner, but the major thing about it that I love is the printed design so I am super disappointed that it’s not available. Is it just JoAnn’s that doesn’t have it anymore or could it be found elsewhere? I was thinking of making it for the top of my old oak upright piano and making fringe on the ends instead of the ruffle.
Thanks for the great idea. Maybe I could stencil on the burlap to create a similar design. I just tho’t of that!
I looked online at several fabric stores and could not find anything even remotely similar. I’m sorry!
Love an easy project.The runner looks beautiful on your table.
Thanks for the tutorial. This turned out really cute. I have a piece of burlap that I put under the Christmas tree last year and would like to use it for a runner. I got it out of my closet and placed it on the bottom shelf of my cart that I am using as a work station for my fall decorating. My cat seems to like laying on the burlap because every time I go to start to make my runner, he is napping on it and I don’t want to disturb him. Maybe I will have to buy more burlap!